2013 Nissan Altima recall: Latches/locks/linkages: hood, latch
Recall at a glance
- Campaign number
- 14V565000
- Reported
- September 15, 2014
- Manufacturer
- Nissan North America, Inc.
- Part
- Latches/locks/linkages: hood, latch
- Vehicles affected
- About 220,423
What is wrong
Nissan North America, Inc. (Nissan) is recalling certain model year 2013 Nissan Altima vehicles manufactured March 6, 2012, to February 28, 2013. In the affected vehicles, interference between the hood inner panel and the secondary latch lever, in combination with debris and corrosion, may cause the secondary hood latch to bind and remain in the unlatched position when the hood is closed.
Safety risk
If the primary latch is inadvertently released and the secondary latch is not engaged, the hood could unexpectedly open while driving, increasing the risk of a vehicle crash.
The fix
Nissan will notify owners, and dealers will be instructed to modify the bend angle of the hood actuation lever to eliminate potential interference with the hood inner panel. In addition, dealers will clean and lubricate the latch joint as needed. If significant corrosion is observed, the latch assembly will be replaced. This repairs will be performed free of charge. The recall began on October 20, 2014. Owners may contact Nissan customer service at 1-800-647-7261.
Affected models
Model years listed by NHTSA for this campaign. Only vehicles within the build range in the notice are affected.
Notes from the notice
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Frequently asked questions
Which vehicles are affected by this recall?
Nissan Altima (2013). Check your VIN to confirm.
What is the safety risk?
If the primary latch is inadvertently released and the secondary latch is not engaged, the hood could unexpectedly open while driving, increasing the risk of a vehicle crash.
What is the fix?
Nissan will notify owners, and dealers will be instructed to modify the bend angle of the hood actuation lever to eliminate potential interference with the hood inner panel. In addition, dealers will clean and lubricate the latch joint as needed. If significant corrosion is observed, the latch assembly will be replaced. This repairs will be performed free of charge. The recall began on October 20, 2014. Owners may…
Source: U.S. National Highway Traffic Safety Administration (NHTSA) recall data for passenger vehicles, recalls since 2013, shown as published. This site is independent and not affiliated with NHTSA or any manufacturer. Check your VIN at nhtsa.gov/recalls and follow your manufacturer’s notice. Terms and disclaimer.