Recall Radar

2019 Jeep Wrangler recalls

NHTSA lists 9 recall campaigns since 2013 that include the 2019 Jeep Wrangler. The most recent was reported on September 12, 2024.

Check your own car by VIN. A recall applies only to certain vehicles, built in certain periods. NHTSA’s recall lookup checks your 17-character VIN against open recalls and is free.

Recalls at a glance

DateCampaignPartVehicles
September 12, 202424V-676Back over prevention: sensing system, camera46
September 5, 202424V-652Electrical system: instrument cluster/panel32,863
February 23, 202323V-116Power train: clutch assembly69,201
January 28, 202121V-028Power train: clutch assembly42,887
September 24, 202020V-580Seat belts: front, retractor2,114
September 10, 202020V-191Back over prevention: sensing system, camera319,610
March 3, 202020V-124Power train: clutch assembly33,237
March 14, 201919V-201Steering52
September 28, 201818V-675Structure: frame and members18,055

Recall details

Back over prevention: sensing system, camera

September 12, 2024 · Chrysler · Campaign 24V-676

What is wrong: Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.

The fix: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.

Electrical system: instrument cluster/panel

September 5, 2024 · Chrysler · Campaign 24V-652

What is wrong: Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."

Risk: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.

The fix: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.

Power train: clutch assembly

February 23, 2023 · Chrysler · Campaign 23V-116

What is wrong: Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.

Power train: clutch assembly

January 28, 2021 · Chrysler · Campaign 21V-028

What is wrong: Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.

Seat belts: front, retractor

September 24, 2020 · Chrysler · Campaign 20V-580

What is wrong: Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.

Risk: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.

The fix: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.

Back over prevention: sensing system, camera

September 10, 2020 · Chrysler · Campaign 20V-191

What is wrong: Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."

Risk: The lingering rearview image can distract the driver, increasing the risk of a crash.

The fix: Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.

Power train: clutch assembly

March 3, 2020 · Chrysler · Campaign 20V-124

What is wrong: Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.

Steering

March 14, 2019 · Chrysler · Campaign 19V-201

What is wrong: Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and 2019 Ram 1500 vehicles. These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column.

Risk: If the steering wheel detaches from the steering column, the driver may lose control of the vehicle, increasing the risk of crash.

The fix: Chrysler will notify owners, and dealers will inspect the steering column, replacing it, as necessary, free of charge. The recall began April 5, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V29.

Structure: frame and members

September 28, 2018 · Chrysler · Campaign 18V-675

What is wrong: Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.

Risk: An unexpected reduction in steering ability, can increase the risk of a crash.

The fix: Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.

Other model years of the Jeep Wrangler

All Jeep Wrangler recalls · All Jeep recalls

Frequently asked questions

Does the 2019 Jeep Wrangler have recalls?

NHTSA lists 9 recall campaigns since 2013 that include the 2019 Jeep Wrangler, the most recent reported on September 12, 2024. A campaign covers only certain vehicles, so check your VIN at nhtsa.gov/recalls to see whether yours is affected.

What parts have been recalled on the 2019 Jeep Wrangler?

Power train (3), Back over prevention (2), Electrical system (1), Seat belts (1).

Are recall repairs free?

In 8 of the 9 campaigns listed here, the remedy states that the repair is free of charge. Read the remedy in each recall for the details.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) recall data for passenger vehicles, recalls since 2013, shown as published. This site is independent and not affiliated with NHTSA or any manufacturer. Check your VIN at nhtsa.gov/recalls and follow your manufacturer’s notice. Terms and disclaimer.